How I Paint - Legions Imperialis - Imperial Fist Yellow

-

 


Paints required:

  • Wraithbone spray
  • Averland Sunset
  • Yriel Yellow
  • Cassandora Yellow
  • Screaming Skull
  • Abaddon Black
  • Leadbelcher
  • Corax White
  • Balthasar Gold
  • Eshin Grey
  • Gryph-Charger Grey
  • Nuln Oil
  • Mephiston Red
  • Evil Suns Scarlet
  • Wild Rider Red
I began by giving the aircraft an undercoat with Wraithbone spray. 

Then a basecoat of Averland Sunset, thinned with a little water, was applied over the miniature. I used a large drybrush and worked quickly, avoiding returning to panels already covered. It took around 2 coats to get a nice solid finish.



When this initial basecoat was fully dry the aircraft was given a second basecoat with Yriel Yellow (a layer paint). Again, this was thinned with a little water and applied with the medium drybrush. Three coats were required to get a nice smooth finish.


When the basecoats were full dry, Cassandora Yellow was painted into the recesses and around the panels of the aircraft using a small detail brush (I use synthetic brushes for this job). Try to be neat but do not worry too much as you can always tidy the miniature up with a little Yriel Yellow. Allow the Cassandora Yellow to full dry.


The aircraft was then drybrushed with Yriel Yellow using a medium drybrush. This was then followed with a second drybrush using a 3:1 mix of Yriel Yellow and Screaming Skull. Then a third drybrush of the previous mix was with some additional Screaming Skull added was applied. This was focused on the sharp edges of the miniature. Remember to check your progress with each drybrush, do not overdo each step. You cannot take away the paint, but you can always add more if necessary. 


The lascannons, the missile launcher and a few panels across the aircraft were given a basecoat with Abaddon Black.

With the main colour of the aircraft complete, it is now time to move on to the metal. The metal details were given a basecoat of Leadbelcher. These details included: the engines, the intake fans, the vertical lift thrusters, the gun barrels, the landing feet and finally, any grills. This step took some time and care was needed not to get the silver onto the yellow fuselage.

The cockpit glass was painted in with Corax White.

The running lights and lenses were painted with Mephiston Red. These were then highlighted with Evil Suns Scarlet and then with Wild Rider Red.


The metal was then wash with Nuln Oil. The cockpit glass was given two coats of Gryph-Charger Grey. The aircraft was turned upside to allow each coat of Gryph-Charger Grey to fully dry.

The lascannon muzzles and the panel edges were highlighted with Eshin Grey.

When this was all fully dry the metal of the engines and any larger areas of metal were given a drybrush with Leadbelcher. The metal around the engine exhausts were given a drybrush with Baltasar Gold. The ends of the engines were given a light drybrush with Abaddon Black.

The coils on the lascannons and the tips of the missiles were given a basecoat with Balthasar Gold. 


The aircraft was finished off by applying transfers to denote aircraft number and the Imperial FIsts Legion (I am still waiting to get my Chapter symbols).

After applying the transfer, careful paint around the symbol/number with Yriel Yellow. When this is fully dry, the panel was given a coat of Matt Varnish.

Imperial Fist Xiphon Interceptors

I am really pleased with the look of these Space Marine aircraft. 

Let me know if you have any thoughts or questions. Bye for now and 'always watch your six'.



Comments

Post a Comment

Popular posts from this blog

How I paint Rockgut Troggoth

-
Image
When I began painting my Rockgut Troggoths (Stone Trolls), I wanted them to look as though a flesh and blood creature had started to petrify. Most of the stone terrain in my collection is grey with a greenish tinge. This was the colour I wanted to replicate on my trolls. As I was painting my trolls, I made a note of the colours I used but I did not take any pictures, as I never intended to make a guide. After I had finished painting these miniatures, I decided to write up the method, in case I needed it again. Then, I thought I might as well share it. Paints required. Chaos Black spray Mechanicum Standard Grey spray Skavenblight Dinge Dawnstone Lahmian Medium  Athonian Camoshade Agrax Earthshade Administratum Grey Bugmans Glow  Rakarth Flesh Screamer Pink Cadian Fleshtone Stormvermin Fur Kislev Flesh Karak Stone Xereus Purple Mephiston Red Painting flesh of the Troggoth I began by given the miniature an undercoat with  Chaos   Black spray.  This was then followed with a light spray of 
Read more

How I paint - Gloomspite Gitz- Squigs

-
Image
When collecting Gloomspite Gitz it quickly becomes apparent that at some point you are going to paint squigs. This is my take on a classic red squig. Paints required: Wraithbone spray Khorne Red Army Painter Red Tone Averland Sunset Wazdakka Red Squig Orange Lahmian Medium Reikland Fleshwash Screamer Pink Pink Horror Pallid Wych Flesh Zandri Dust Agrax Earthshade Xereus Purple Genestealer Purple Yriel Yellow Druchii Violet .  Kantor Blue Thousand Sons Blue Ahriman Blue Temple Guard Blue . The miniatures were primed with Wraithbone spray. The scheme works over black, but you must build a nice sold layer of red at the start. This was then followed by a basecoat of Khorne Red . I thinned the Khorne Red with a little water. It took a few coats to get a nice solid finish. The miniature was then given a wash with Army Painter Red Tone thinned with a little water. The eyes were painted in with Averland Sunset .  To highlight the flesh, I began with Wazdakka Red . This was then followed by a
Read more

How I paint Moonclan Grots

-
Image
  I have a large Ork army for Warhammer 40k, but it has been a few years since I have painted any Greenskins. T hanks in part to  my backlog of Warhammer Underworlds warbands and a desire to paint some Destruction miniatures for Warcry I have been painting up my Ironjaws and t he Gloomspite Gitz . I love Mo on clan Grots as , with most Greenskin armies, they are played primarily for fun and if you win any games with them, so much the better. I wanted to paint my Gitz in a classic style, like 'back in the day' when I was using Night Goblins in the w orld - that - was. So here is my take on these nasty little backstabbers. I hope you enjoy and I would love to he ar any comments.    Other guides you might find useful: How I paint Moonclan Grots How I paint Rockgut Troggoth How I paint Squigs How I paint Orruk Armour Army Collection - Gloomspite Gitz Paints required:   Chaos Black spray   Abaddon Black   Stormvermin Fur   Rhinox Hide   Leadbelcher   Nuln Oil ( or
Read more